Machanical Property

Technical Data Sheet
PROPERTY	Test Method	VALUE	UNIT
1. Density	ASTM D792-2008 METHOD B	1.285	G/CM3
2. Flexural Moduls	ASTM D790-07E1	3070	Mpa
3. Flexural Strength	ASTM D790-07E1	38	Mpa
4. Tensile Strength	ASTM D638-08	21.08	MPA
5. Water Absorption	ASTM D570-98	0.8	%
6. Linear Thermal Expansion Coeffiecient	TMA	49.82	UM/M °C
7. IZOD Impact Strength	ASTM D4812-06	79	J/m
8. Hardness	ASTM D2240-05	D/76/1
9. Curling strength	ASTM D790	≥12	Mpa
10. Horizontal Burning	UL 94-1996REV.9:2006 SECTION 7	22	MM/MIN
11. Curling Flexible Module	ASTM D790	≥1600	Mpa
12. Compression Strength	ASTM D143	≥30	Mpa
13. Grip Nail Strength	ASTM D1037	≥3000	N
14. Nail Withdrawal Test	ASTM D1761	802	psi
15. Creep Recovery Test	ASTM D7032-SECTION 5.4	82.66	%
16. Hot Distorted Temperature	ASTM D648	≥100	°C
17.UV Resistance (Light Resistance / Xenon-Arc Exposure)	IS0105-02:2000/Amd.2:2000(E), ISO 105-A02:1993 Cor2:2005, Exposure720 hours	Grey 4-5 grey scale Brown 4 grey scale Mahogany 4-5 grey scale Dark Walnut 4-5 grey scale	/
18.Thermal Shock Test	IEC 60068-2-14 Na: 1986, 5 cycles	No signs of cracking, warping, chipping and discoloration	/
19.Slip Resistance (Using a Horizontal Pull Slipmeter)	ASTM F 609	Slip Index Reading 6.63	/
20. Material Composition		Recycle Plastic 35% Natural Fibre 60% Additive 5%	/
21.Mould Resistance	ASTM F609	First Grade	/
22.Flame Resistance	UL 94-1996REV.9:2006 section7